QuickConveyor Logo
home |
modules_drawings |
products |
sales information |
Engineering |
Contact Information |
Bar
Conveyor Products
PRODUCT Q107 - DISK CURVE LEG
Conveyor product info
   DISK CURVE LEG


APPLICATION NOTES:
Disk Curve products Q157, Q167, and Q197, use this leg for support.


  • Conveyor height to top of chain is adjustable between 36" and 41".
  • Leg tube is 1 1/2" Sch. 10 stainless pipe.
  • Leg tube can be cut for lower conveyor heights.
  • Leg tube can be replaced for higher conveyor heights.
  • Leg feet can be adjusted for uneven floors +/- 2".
  • Leg feet are 3 1/8" diameter and have two holes for 5/16-18 NC bolts for floor anchoring.
  • All parts required to bolt leg to conveyor are included.
PARTS INCLUDED:
Part # Qty. Part Name
20 1 1" SS SET SCREW SHAFT COLLAR
38 1 LEG TUBE
48 1 LEG FOOT
103 1 1" SS SHAFT SPACER
144 24 1 1/2" SCH. 10 SS PIPE
159 1 SQUARE LEG TOP
171 1 2" ROUND 5/8-11NC TUBE END
188 1 SQUARE LEG PLATE
189 1 DISK CURVE LEG PLATE ASSEMBLY
16 4 5/16-18NC SERRATED FLANGE NUT
26 4 5/16" FLAT WASHER
127 4 5/16-18NC x 1 1/2" HEX HEAD BOLT