24" IDLE - Part # Q123

PRODUCT Q123 - 24" IDLE

view larger

APPLICATION NOTES:
Used to provide an idle at beginning of the conveyor.

Connector and bottom guide rail brackets are included at discharge end.
Idle can use either Drive/Idle Leg Q194 or 24" Drive/Idle Return Shoe Leg Q126.
Top guide rail brackets are not included.
Wearstrips are included.
Removable 12 ga. deadplate is included at infeed end.
The 2" sq. tube connector is removable from the 24" idle. A curve, drive or transfer can be inserted into the idle after the connector is removed. A straight is not required between the 24" idle and other modules.
Chain length required: 48"

Part #	Qty.	Part Name
PARTS INCLUDED:
1	2	BOTTOM GUIDE RAIL BRACKET - 5 5/8" ONE HOLE
3	2	BOTTOM GUIDE RAIL BRACKET - 9" TWO HOLE
4	2	GUIDE RAIL SPACER
13	1	HOUSING END - 3 1/4" CHAIN
25	1	1 1/2" KEY
44	2	24" SIDE
46	2	RETURN SHOE
61	1	3" RETURN GUIDE BLOCK
90	1	880-11T-1" SPROCKET
93	1	HOUSING END DEADPLATE - 3 1/4" CHAIN
157	1	RETURN CHAIN GUIDE BLOCK PLATE - 3 1/4" CHAIN
160	1	6 1/2" IDLE SHAFT
180	21	3 3/8" MACHINED WEARSTRIP
182	1	HOUSING END BOTTOM PLATE - 3 1/4" CHAIN
192	2	1" 3 BOLT BEARING - STEEL
208	1	16' D/I WEARSRIP SUPPORT PLATE - 3 1/4" CHAIN
211	1	18" DRIVE IDLE WEARSTRIP
212	1	4" SS CONNECTOR TUBE
226	6.5	1" KEYED SHAFTING
998	1	WELDMENT LABOR
16	22	5/16-18NC SERRATED FLANGE NUT
19	6	5/16-18NC x 1/2" HEX HEAD BOLT
22	2	5/16" LOCK WASHER
26	15	5/16" FLAT WASHER
127	4	5/16-18NC x 1 1/2" HEX HEAD BOLT
130	1	5/16-18NC x 5 1/2" HEX HEAD BOLT
131	3	5/16-18NC x 1" HEX HEAD BOLT
134	10	5/16-18NC x 7/8" HEX HEAD BOLT