APPLICATION NOTES:
Kit designed for half round guide rails spaced on 2 1/2" centers.
|
- Kit consists of 4 plates with GR clamp and spacers. Plates slide and clamp on lower half round guide rail.
- Rail is 1/4" x 3" UHMW plastic.
- Rail is fixed to the center guide rail bracket and slides on the half round guide rails at each end.
- Half round guide rails cut to overhang 7" into curve from end of curve.
- Guide rails will adjust from 1" to 4" between rails.
- Medium top GR brackets are recommended.
- Top GR brackets, carriage bolts, guide rail clips, flat washers, and rachet handles are not included in the kit and need to be ordered separately.
- Two 3/8" thick spacers are included for infeed to curve. They space the 1/4" x 3" guide rail so it is inside the half round guide rails.
- Two 1/2" thick spacers are included for discharge of curve. They space the 1/4" x 3" guide rail so it is outside the half round guide rails.
|
|
PARTS INCLUDED:
|
Part # |
Qty. |
Part Name |
63 |
4 |
SMALL GUIDE RAIL CLAMP PLATE |
158 |
8 |
SIDE SPACER |
170 |
8 |
1" DIA. X 1/2" SPACER |
217 |
1 |
DISK CURVE INSIDE GUIDE RAIL |
218 |
1 |
DISK CURVE OUTSIDE GUIDE RAIL |
225 |
4 |
8" R CURVE SPLICE PLATE |
16 |
13 |
5/16-18NC SERRATED FLANGE NUT |
19 |
4 |
5/16-18NC x 1/2" HEX HEAD BOLT |
26 |
1 |
5/16" FLAT WASHER |
206 |
9 |
5/16-18NC x 1" FLAT HEAD BOLT |
|