APPLICATION NOTES:
Curve includes UHMW top and bottom machined wearstrips between 12 Ga. SS sides.
|
- Curve can operate clockwise or counterclockwise.
- Curve Connector and bottom guide rail brackets are included at both ends.
- Wearstrips are included.
- Top guide rail brackets are not included.
- 18" radius curve cannot bolt directly to a curve, 30" drive, 30" idle, or transfer. An 8" or longer straight must be installed between modules except for 24" drive or 24" idle. A 24" drive or a 24" idle can be bolted directly to a curve if the 2" sq. tube connector is removed.
- Use 18" Radius Curve Guide Rail Kit Q101 to obtain parts to allow guide rail adjustment.
- Curve housing is 3 3/8" wide. Curve can tangent into straights if one end guide rail bracket and spacer is removed.
- Chain length required: 10"
|
|
PARTS INCLUDED:
|
Part # |
Qty. |
Part Name |
1 |
4 |
BOTTOM GUIDE RAIL BRACKET - 5 5/8" ONE HOLE |
4 |
4 |
GUIDE RAIL SPACER |
12 |
10 |
4" CURVE SIDE |
33 |
1 |
18" R CURVE WEARSTRIP SUPPORT |
49 |
1 |
18" RADIUS 90 DEGREE CURVE WEARSTRIP |
106 |
1 |
18" RADIUS 15 DEGREE INSIDE CURVE SIDE |
107 |
1 |
18" RADIUS 15 DEGREE OUTSIDE CURVE SIDE |
108 |
2 |
18" RADIUS 15 DEGREE CURVE WEARSTRIP |
212 |
2 |
CURVE CONNECTOR TUBE |
998 |
1 |
WELDMENT LABOR |
16 |
3 |
5/16-18NC SERRATED FLANGE NUT |
26 |
5 |
5/16" FLAT WASHER |
130 |
2 |
5/16-18NC x 5 1/2" HEX HEAD BOLT |
234 |
1 |
5/16-18NC x 3" HEX HEAD BOLT |
|