QuickConveyor Logo
home |
modules_drawings |
products |
sales information |
Engineering |
Contact Information |
Bar
Conveyor Products
PRODUCT Q190 - 18" RADIUS 30 DEGREE CURVE
Conveyor product info
   18"  RADIUS 30 DEGREE CURVE


APPLICATION NOTES:
Curve includes UHMW top and bottom machined wearstrips between 12 Ga. SS sides.


  • Curve can operate clockwise or counterclockwise.
  • Curve connector and bottom guide rail brackets are included at both ends.
  • Wearstrips are included.
  • Top guide rail brackets are not included.
  • 18" radius curve cannot bolt directly to a curve, 30" drive, 30" idle, or transfer. An 8" or longer straight must be installed between modules except for 24" drive or 24" idle. A 24" drive or a 24" idle can be bolted directly to a curve if the 2" sq. tube connector is removed.
  • Use 18" Radius Curve Guide Rail Kit Q101 to obtain parts to allow guide rail adjustments.
  • Curve housing is 3 3/8" wide. Curve can tangent into straights if one end guide rail bracket and spacer is removed.
  • Chain length required: 19"
PARTS INCLUDED:
Part # Qty. Part Name
1 4 BOTTOM GUIDE RAIL BRACKET - 5 5/8" ONE HOLE
4 4 GUIDE RAIL SPACER
12 19 4" CURVE SIDE
33 1 18" R CURVE WEARSTRIP SUPPORT
49 1 18" RADIUS 90 DEG. CURVE WEARSTRIP
109 1 18" RADIUS 30 DEG. INSIDE CURVE SIDE
110 1 18" RADIUS 30 DEG. OUTSIDE CURVE SIDE
111 2 18" RADIUS 30 DEG. CURVE WEARSTRIP
212 2 CURVE CONNECTOR TUBE
998 1 WELDMENT LABOR
16 4 5/16-18NC SERRATED FLANGE NUT
26 6 5/16" FLAT WASHER
130 2 5/16-18NC x 5 1/2" HEX HEAD BOLT
234 2 5/16-18NC x 3" HEX HEAD BOLT