30" LEFT TO RIGHT TRANSFER

PRODUCT Q195 - 30" LEFT TO RIGHT TRANSFER

view larger

APPLICATION NOTES:
Transfers include a drive and an idle in one housing.

Straight connectors and bottom guide rail brackets are included at both ends.
Gearmotor not included. Order Q161 or Q162 separately.
Includes hardware and mounting plate for gearmotor.
Top guide rail brackets are not included.
Wearstrips are included.
Requires two Drive/Idle Legs Q194.
The gap between chains is 1/8".
Transfer cannot bolt directly to curve, 30" idle, 30" drive or transfer. An 8" or longer straight must be installed between modules. A 24" drive or idle can bolt directly to a transfer if the 2" sq. tube connector is removed.
Chain length required: 120"

Part #	Qty.	Part Name
PARTS INCLUDED:
1	4	BOTTOM GUIDE RAIL BRACKET - 5 5/8" ONE HOLE
3	2	BOTTOM GUIDE RAIL BRACKET - 9" TWO HOLE
4	4	GUIDE RAIL SPACER
13	2	HOUSING END - 3 1/4" CHAIN
25	3	1 1/2" KEY
55	4	10" RETURN SHOE
59	2	22" D/I WEARSTRIP SUPPORT PLATE
61	2	3" RETURN GUIDE BLOCK
90	2	880-11T-1" SPROCKET
93	2	HOUSING END DEADPLATE - 3 1/4" CHAIN
102	2	30" SIDE
119	2	24" DRIVE/IDLE WEARSTRIP
157	2	RETURN GUIDE BLOCK PLATE - 3 1/4" CHAIN
158	11	1" DIA. X 3/8" SPACER
160	1	4 1/4" IDLE SHAFT
161	1	8 1/4" DRIVE SHAFT
180	54	3 3/8" MACHINED WEARSTRIP
182	2	HOUSING END BOTTOM PLATE - 3 1/4" CHAIN
192	3	1" 3 BOLT BEARING - STEEL
212	2	4" SS CONNECTOR TUBE
226	12.5	1" KEYED SHAFTING
998	2	WELDMENT LABOR
16	28	5/16-18NC SERRATED FLANGE NUT
19	8	5/16-18NC x 1/2" HEX HEAD BOLT
22	4	5/16" LOCK WASHER
26	24	5/16" FLAT WASHER
127	3	5/16-18NC x 1 1/2" HEX HEAD BOLT
129	2	5/16-18NC x 3 1/4" HEX HEAD BOLT
130	2	5/16-18NC x 5 1/2" HEX HEAD BOLT
131	6	5/16-18NC x 1" HEX HEAD BOLT
133	2	5/16-18NC x 3 1/2" HEX HEAD BOLT
134	6	5/16-18NC x 7/8" HEX HEAD BOLT
147	3	5/16-18NC x 1 1/4" HEX HEAD BOLT